eMG1 rubber bellow mechanical seal for marine industry

Our personnel are always in the spirit of “continuous improvement and excellence”, and with the superior quality products, favorable price and good after-sales services, we try to win every customer’s trust for eMG1 rubber bellow mechanical seal for marine industry, If you are fascinated in any solutions, you should experience absolutely free to make contact with us for additional details or you should send out us email instantly, we will reply you within just 24 hours and also the best quotation might be provided.
Our personnel are always in the spirit of “continuous improvement and excellence”, and with the superior quality products, favorable price and good after-sales services, we try to win every customer’s trust for , The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.

Features

For plain shafts

Single and dual seal

Elastomer bellows rotating

Balanced

Independent of direction of rotation test

Advantages

• 100 % compatible with MG1

• Small outer diameter of bellows support (dbmin) enables direct retaining ring support, or smaller spacer rings
• Optimal alignment characteristic through self-cleaning of disk/shaft
• Improved centering across entire pressure operating range

• No torsion on bellows
• Shaft protection over entire seal length
• Protection of seal face during installation due to special bellows design
• Insensitive to shaft deflections due to large axial movement ability
• Suitable for low-end sterile applications

Recommended applications

• Fresh water supply
• Building services engineering
• Waste water technology
• Food technology
• Sugar production
• Pulp and paper industry
• Oil industry
• Petrochemical industry
• Chemical industry

• Water, waste water, slurries
  (solids up to 5 % by weight)
• Pulp (up to 4 % otro)
• Latex
• Dairies, beverages
• Sulfide slurries
• Chemicals
• Oils

• Chemical standard pumps
• Helical screw pumps
• Stock pumps
• Circulating pumps
• Submersible pumps
• Water and waste water pumps

s

Operating range

Shaft diameter:
d1 = 14 … 110 mm (0.55″ … 4.33″)
Pressure: p1 = 18 bar (261 PSI),
vacuum … 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature: t = -20 °C … +140 °C
(-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Admissible axial movement: ±2.0 mm (±0.08″)

Combination material

Stationary Ring: Ceramic, Carbon, SIC, SSIC, TC
Rotary Ring: Ceramic, Carbon, SIC, SSIC, TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Parts: SS304/SS316

WeMG1  data sheet of dimension(mm)

eMG1 rubber bellow mechanical seal