M7N water pump mechanical seal for marine industry

Short Description:

Product Detail

Product Tags

With this motto in mind, we have turn out to be amongst probably the most technologically innovative, cost-efficient, and price-competitive manufacturers for M7N water pump mechanical seal for marine industry, We always stick to the principle of “Integrity, Efficiency, Innovation and Win-Win business”. Welcome to visit our website and do not hesitate to communicate with us. Are you ready? ? ? Let us go!!!
With this motto in mind, we have turn out to be amongst probably the most technologically innovative, cost-efficient, and price-competitive manufacturers for , If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows “Survive by good quality, Develop by keeping good credit. ” operation policy. Welcome all the clients old and new to visit our company and talk about the business. We’ve been looking for more and more customers to create the glorious future.

Replacement for the below mechanical seals

Burgmann M7N ,LIDERING LWS10, Latty U68, Flowserve Europac 600, Vulcan 1677, AESSEAL W07DMU, Anga V, Sterling 270, Hermetica M251.K2

Features

For plain shafts
Single seal
Unbalanced
Super-Sinus-spring or multiple springs rotating
Independent of direction of rotation

Advantages

Universal application opportunities
Efficient stock keeping due to easily interchangeable faces
Extended selection of materials
Insensitive to low solids contents
Flexibility in torque transmissions
Self-cleaning effect
Short installation length possible (G16)
Pumping screw for media with higher viscosity

Operating Range

Shaft diameter:
d1 = 14 … 100 mm (0.55 ” … 3.94 “)
Pressure:
p1 = 25 bar (363 PSI)
Temperature:
t = -50 °C … +220 °C
(-58 °F … +428 °F)
Sliding velocity:
vg = 20 m/s (66 ft/s)

Axial movement:
d1 = up to 25 mm: ±1.0 mm
d1 = 28 up to 63 mm: ±1.5 mm
d1 = from 65 mm: ±2.0 mm

Combination Material

Rotary Face
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Cr-Ni-Mo Steel (SUS316)
Stationary Seat
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Auxiliary Seal
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)
Silicone-Rubber（MVQ)
PTFE Coated VITON

Spring
Stainless Steel (SUS304)
Stainless Steel （SUS316)

Metal Parts
Stainless Steel (SUS304)
Stainless Steel （SUS316)