Assume full obligation to meet all calls for of our clients; realize steady advancements by marketing the advancement of our clients; turn out to be the final permanent cooperative partner of clientele and maximize the interests of clients for Burgmann M74D double mechanical seal for marine industry, Our company eagerly looks ahead to setting up long-term and pleasant small business partner associations with customers and businessmen from everywhere in the entire world.
Assume full obligation to meet all calls for of our clients; realize steady advancements by marketing the advancement of our clients; turn out to be the final permanent cooperative partner of clientele and maximize the interests of clients for , Aiming to grow to be by far the most expert supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal items. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you’ll be served with good quality consultant service by our after-sale team. They’re likely to make it possible for you to get complete acknowledge about our products and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
Features
•For plain shafts
•Dual seal
•Unbalanced
•Rotating multiple springs
•Independent of direction of rotation
•Seal concept based on the M7 range
Advantages
•Efficient stock keeping due to easily interchangeable faces
•Extended selection of materials
•Flexibility in torque transmissions
•EN 12756 (For connection dimensions d1 up to 100 mm (3.94″))
Recommended applications
•Chemical industry
•Process industry
•Pulp and paper industry
•Low solids content and low abrasive media
•Toxic and hazardous media
•Media with poor lubrication properties
•Adhesives
Operating range
Shaft diameter:
d1 = 18 … 200 mm (0.71″ … 7.87″)
Pressure:
p1 = 25 bar (363 PSI)
Temperature:
t = -50 °C … 220 °C
(-58 °F … 428 °F)
Sliding velocity:
vg = 20 m/s (66 ft/s)
Axial movement:
d1 up to 100 mm: ±0.5 mm
d1 from 100 mm: ±2.0 mm
Combination Materials
Stationary Ring (Carbon/SIC/TC)
Rotary Ring (SIC/TC/Carbon)
Secondary Seal (VITON/PTFE+VITON)
Spring & Other Parts (SS304/SS316)
WM74D data sheet of dimension(mm)
Double face mechanical seals are designed to ensure that mechanical seals can work in a maximum sealing mode. Double face mechanical seals virtually remove leakage of the fluid or gas in pumps or mixers. Double mechanical seals provide a level of safety and minimize pump emission compliance not possible with single seals.It is essential to pump or mix a dangerous or toxic substance.
Double mechanical seals are mostly used in flammable, explosive, toxic, granular and lubricating medium. When it is used, it needs a sealing auxiliary system, that is, the isolation fluid is inserted in the sealing cavity between the two ends, thereby improving the lubrication and cooling conditions of the mechanical seal. The pump products that use double mechanical seal are: fluorine plastic centrifugal pump or IH stainless steel chemical pump, etc.
Burgmann M74D double mechanical seal, pump shaft seal, pump shaft seal,
