Cheap Sealing Solution Manufacturer – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS

Short Description:

Product Detail

Product Tags

Feedback (2)

Persisting in "High good quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with shoppers from each overseas and domestically and get new and previous clients' high comments for Grundfos Mechanical Seal, Mechanical Seals Repair, Pump Shaft Seal, We have been sincerely looking forward to developing very good cooperative relationships with buyers from at home and abroad for creating a vibrant foreseeable future together.

Cheap Sealing Solution Manufacturer – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS Detail:

Replacement of Below Mechanical Seals

Burgmann MG901, John crane Type 1, AES P05U, Flowserve 51, Vulcan A5

Technical Features

Unbalanced
Single Spring
Bi-directional
Elastomer Bellows
Set screw lock collars available

Designed Features

To absorb both breakout and running torque, the seal is designed with a drive band and drive notches that eliminate overstressing of bellows. Slippage is eliminated, protecting the shaft and sleeve from wear and scoring.
Automatic adjustment compensates for abnormal shaft-end play, run-out, primary ring wear and equipment tolerances. Uniform spring pressure compensates for axial and radial shaft movement.
Special balancing accommodates higher-pressure applications, greater operating speeds and lower wear.
Non-clogging, single-coil spring allows for greater dependability than multiple spring designs. Will not run foul due to fluid contact.
Low drive torque improves performance and reliability.

Operating Range

Temperature: -40°C to 205°C/-40°F to 400°F (depending on materials used)

Pressure: 1: up to 29 bar g/425 psig 1B: up to 82 bar g/1200 psig
Speed: 20 M/S 4000 FPM
Standard size:12-100mm or 0.5-4.0 inch

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Material

Rotary Face
Carbon graphite resin impregnated
Tungsten carbide
Silicon carbide (RBSIC)
Stationary Seat
Aluminium oxide(Ceramic)
Silicon carbide (RBSIC)
Tungsten carbide 1

Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR)
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)
Spring
Stainless Steel (SUS304, SUS316)
Metal Parts
Stainless Steel (SUS304, SUS316)

Recommended Applications

Water and waste water technology
Petroleum chemical industry
Industrial pumps
Process pumps
Other Rotating Equipment

product-description1

TYPE W1 dimension data sheet (inches)

product-description2

Product detail pictures:

Related Product Guide:

Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for Cheap Sealing Solution Manufacturer – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS, The product will supply to all over the world, such as: Milan, Czech republic, Kuwait, All the imported machines effectively control and guarantee the machining precision for the products. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality products and have the ability to develop new products to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.

Component Mechanical Seals