Cheap Pump Spare Part Factory – WUS-2 O-Ring Shaft Seal To Replace Nippon Pillar Mechanical Seals US-2 For Marine Pump – VICTOR SEALS

Features

• Robust O-Ring mounted Mechanical Seal
• Capable of many shaft-sealing duties
• Unbalanced pusher-type Mechanical Seal

Combination Material

Rotary Ring
Carbon, SIC, SSIC, TC
Stationary Ring
Carbon, Ceramic, SIC, SSIC, TC
Secondary Seal
NBR/EPDM/Viton

Spring
Stainless Steel (SUS304)
Stainless Steel （SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel （SUS316)

Operating Ranges

• Mediums: Water, oil, acid, alkali, etc.
• Temperature: -20°C~180°C
• Pressure: ≤1.0MPa
• Speed: ≤ 10 m/Sec

Maximum Operating Pressure Limits primarily depend upon Face Materials, Shaft Size, Speed and Media.

Advantages

Pillar seal is widely used for big sea ship pump, In order to prevent corrosion by sea water, it is furnished with mating face of plasma flame fusible ceramics. so it is a marine pump seal with ceramic coated layer on the seal face, offer more resistance against sea water.

It can be used in reciprocating and rotary movement and can adapt to most fluids and chemicals. Low friction coefficient, no crawling under precise control, good anti-corrosion capability and good dimensional stability. It can withstand rapid temperature changes.

Suitable Pumps

Naniwa Pump, Shinko Pump, Teiko Kikai, Shin Shin for BLR Circ water, SW Pump and many other applications.

WUS-2 dimension data sheet (mm)