Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for eMG1 mechanical pump shaft seal for marine industry, We focus on to make exceptional excellent products and solutions to provide assistance for our purchasers to determine long-term win-win partnership.
Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for , Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We’re likely to be delighted to give you a quotation up on receipt of one’s in depth specs.
Features
For plain shafts
Single and dual seal
Elastomer bellows rotating
Balanced
Independent of direction of rotation test
Advantages
- 100 % compatible with MG1
- Small outer diameter of bellows support (dbmin) enables direct retaining ring support, or smaller spacer rings
- Optimal alignment characteristic through self-cleaning of disk/shaft
- Improved centering across entire pressure operating range
- No torsion on bellows
- Shaft protection over entire seal length
- Protection of seal face during installation due to special bellows design
- Insensitive to shaft deflections due to large axial movement ability
- Suitable for low-end sterile applications
Recommended applications
- Fresh water supply
- Building services engineering
- Waste water technology
- Food technology
- Sugar production
- Pulp and paper industry
- Oil industry
- Petrochemical industry
- Chemical industry
- Water, waste water, slurries
(solids up to 5 % by weight) - Pulp (up to 4 % otro)
- Latex
- Dairies, beverages
- Sulfide slurries
- Chemicals
- Oils
- Chemical standard pumps
- Helical screw pumps
- Stock pumps
- Circulating pumps
- Submersible pumps
- Water and waste water pumps
s
Operating range
Shaft diameter:
d1 = 14 … 110 mm (0.55″ … 4.33″)
Pressure: p1 = 18 bar (261 PSI),
vacuum … 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature: t = -20 °C … +140 °C
(-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Admissible axial movement: ±2.0 mm (±0.08″)
Combination material
Stationary Ring: Ceramic, Carbon, SIC, SSIC, TC
Rotary Ring: Ceramic, Carbon, SIC, SSIC, TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Parts: SS304/SS316
WeMG1 data sheet of dimension(mm)
eMG1 mechanical seal, water pump shaft seal, mechanical pump seal
