We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for eMG rubber bellow mechanical seal for marine industry, Standing still today and searching into the longer term, we sincerely welcome customers everywhere in the planet to cooperate with us.
We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for , All of our solutions comply with international quality standards and are greatly appreciated in a variety of markets around the world. If you are interested in any of our products or would like to discuss a custom order, be sure to feel free to contact us. We’ve been looking forward to forming successful business relationships with new clients in the near future.
Features
For plain shafts
Single and dual seal
Elastomer bellows rotating
Balanced
Independent of direction of rotation test
Advantages
- 100 % compatible with MG1
- Small outer diameter of bellows support (dbmin) enables direct retaining ring support, or smaller spacer rings
- Optimal alignment characteristic through self-cleaning of disk/shaft
- Improved centering across entire pressure operating range
- No torsion on bellows
- Shaft protection over entire seal length
- Protection of seal face during installation due to special bellows design
- Insensitive to shaft deflections due to large axial movement ability
- Suitable for low-end sterile applications
Recommended applications
- Fresh water supply
- Building services engineering
- Waste water technology
- Food technology
- Sugar production
- Pulp and paper industry
- Oil industry
- Petrochemical industry
- Chemical industry
- Water, waste water, slurries
(solids up to 5 % by weight) - Pulp (up to 4 % otro)
- Latex
- Dairies, beverages
- Sulfide slurries
- Chemicals
- Oils
- Chemical standard pumps
- Helical screw pumps
- Stock pumps
- Circulating pumps
- Submersible pumps
- Water and waste water pumps
s
Operating range
Shaft diameter:
d1 = 14 … 110 mm (0.55″ … 4.33″)
Pressure: p1 = 18 bar (261 PSI),
vacuum … 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature: t = -20 °C … +140 °C
(-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Admissible axial movement: ±2.0 mm (±0.08″)
Combination material
Stationary Ring: Ceramic, Carbon, SIC, SSIC, TC
Rotary Ring: Ceramic, Carbon, SIC, SSIC, TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Parts: SS304/SS316
WeMG1 data sheet of dimension(mm)
eMG1 mechanical pump seal
