wave spring HJ92N mechanical seal for marine industry

Short Description:

WHJ92N is a balanced, wave spring mechanical sea with spring-protection design, non-clogging. mechanical seal WHJ92N is designed for media containing solid or with high viscosity. It is widely used in paper, textile printing, sugar and sewage treatment industry.

Analogue for: AESSEAL M010, Anga US, Burgmann HJ92N, Hermetica M251K.NCS, Latty B23, Roplan 201, Roten EHS.

Send email to us

Product Detail

Product Tags

“Control the standard by the details, show the energy by quality”. Our enterprise has strived to establish a hugely efficient and stable staff members staff and explored an effective good quality control procedure for wave spring HJ92N mechanical seal for marine industry, With our rules of ” small business status, partner trust and mutual benefit”, welcome all of you to definitely get the job done jointly , mature jointly.
“Control the standard by the details, show the energy by quality”. Our enterprise has strived to establish a hugely efficient and stable staff members staff and explored an effective good quality control procedure for , Our domestic website’s generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !

Features

For unstepped shafts
Single seal
Balanced
Independent of direction of rotation
Encapsulated rotating spring

Advantages

Especially designed for solids containing and highly viscous media
Springs are protected from the product
Rugged and reliable design
No damage of the shaft by dynamically loaded O-Ring
Universal application
Variant for operation under vacuum available
Variants for sterile operation available

Operating Range

Shaft diameter:
d1 = 18 … 100 mm (0.625″ … 4″)
Pressure:
p1*) = 0.8 abs…. 25 bar (12 abs. … 363 PSI)
Temperature:
t = -50 °C … +220 °C (-58 °F … +430 °F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement: ±0.5 mm

* An integral stationary seat lock is not needed within the permissible low pressure range. For prolonged operation under vacuum it is necessary to arrange for quenching on the atmospheric side.

Combination Materials

Rotary Face
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Antimony Impregnated Carbon
Stationary Seat
Silicon carbide (RBSIC)
Tungsten carbide
Auxiliary Seal
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)

Spring
Stainless Steel (SUS304)
Stainless Steel （SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel （SUS316)