We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of O ring mechanical pump seal H7N for marine industry, We could do your personalized buy to satisfy your own satisfactory! Our firm sets up several departments, including generation department, product sales department, quality control department and sevice center, etc.
We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of , Welcome any of your inquiries and concerns for our products. We look forward to establishing a long-term business relationship with you in the near future. Contact us today. We are the first business partner for you!
Features
•For stepped shafts
•Single seal
•Balanced
•Super-Sinus-spring or multiple springs rotating
•Independent of direction of rotation
•Integrated pumping device available
•Variant with seat cooling available
Advantages
•Universal application opportunities (standardization)
•Efficient stock keeping due to easily interchangeable faces
•Extended selection of materials
•Flexibility in torque transmissions
•Self-cleaning effect
•Short Installation length possible (G16)
Recommended applications
•Process industry
•Oil and gas industry
•Refining technology
•Petrochemical industry
•Chemical industry
•Power plant technology
•Pulp and paper industry
•Food and beverage industry
•Hot water applications
•Light hydrocarbons
•Boiler feed pumps
•Process pumps
Operating range
Shaft diameter:
d1 = 14 … 100 mm (0.55″ … 3.94″)
(Single spring: d1 = max. 100 mm (3.94″))
Pressure:
p1 = 80 bar (1,160 PSI) for d1 = 14 … 100 mm,
p1 = 25 bar (363 PSI) for d1 = 100 … 200 mm,
p1 = 16 bar (232 PSI) for d1 > 200 mm
Temperature:
t = -50 °C … 220 °C (-58 °F … 428 °F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement:
d1 up to 22 mm: ± 1.0 mm
d1 24 up to 58 mm: ± 1.5 mm
d1 from 60 mm: ± 2.0 mm
Combination Materials
Rotary Face
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Cr-Ni-Mo Steel (SUS316)
Stationary Seat
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Auxiliary Seal
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)
Silicone-Rubber（MVQ)
PTFE Coated VITON
Spring
Stainless Steel (SUS304)
Stainless Steel （SUS316)
WH7N data sheet of dimension (mm)
WAVE SPRINGS ARE COMPACT BIDIRECTIONAL SEALS ORIGINALLY DESIGNED FOR SHORT WORKING LENGTH AND HYGIENIC REQUIREMENTS.
Wave springs are mechanical seals designed to replace conventional round wire compression springs in applications that require a tight load deflection specification in a space critical environment. They provide a more even face loading than a Parallel or Taper Spring, and a smaller envelope requirement to achieve a similar face loading.
Bi-directional mechanical seals offer proven seal design and wave spring technology, in a range of material combinations. This is enhanced by superior design features, all at very competitive prices.
H7N mechanical pump seal for marine industry
