Cheap Cartridge Seal Factory – W301 Single spring mechanical shaft size eagle Burgmann BT-AR replacement – VICTOR SEALS

Advantages

Mechanical seal for large-series cold water pumps, produced in millions of units per year. W301 owes its success to the wide range of application, the short axial length (this allows for more economic pump construction and saves material), and the best quality/price ratio. The elasticity of the bellows design enables a more robust operation.

The W301 can also be used as a multiple seal in tandem or back-to-back arrangement when the product media cannot ensure lubrication, or when sealing media with a higher solids content. Installation proposals can be provided upon request.

Features

•Rubber bellows mechanical seal
•Unbalanced
•Single spring
•Independent of direction of rotation
•Short axial installation length

Operating range

Shaft diameter: d1 = 6 … 70 mm (0.24″ … 2.76″)
Pressure: p1* = 6 bar (87 PSI),
vacuum … 0.5 bar (7.45 PSI) up to 1 bar (14.5 PSI) with seat locking
Temperature:
t* = -20 °C … +120 °C (-4 °F … +248 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)

* Dependent on medium, size and material

Combination material

Seal face:
Carbon graphite antimony impregnated Carbon graphite resin impregnated, Carbon graphite, full carbon , Silicon carbide, Tungsten carbide
Seat:
Aluminium oxide, Silicon carbide, Tungsten carbide,
Elastomers:
NBR (P), EPDM (E), FKM (V), HNBR (X4)
Metal parts: stainless steel

W301 data sheet of dimension (mm)